发布于: 修改于: 雪球转发:0回复:5喜欢:0
$开山股份(SZ300257)$
Improving Well Power Output Using Modular Geothermal Power Plants
The geothermal energy is an expensive thermal energy due to many uncertainties and high costs on the resource development. The higher the geothermal well power output, the relatively lower the geothermal resource development cost. The geothermal well power output should be maximized and the low-pressure wasted wells or idling wells should be avoided or eliminated. Kaishan Group have developed the following four types of modular geothermal power plants: steam screw expander modular power plants, steam ORC modular power plants, brine ORC modular power plants and steam & brine dual resource modular power plants, all of which have been installed and have been operating in North America, Europe, Asia and Africa. The modular power plants have the maximum flexibility to be used to form various hybrid thermal cycles, then to maximize the well power output and to utilize the geothermal wells of various enthalpy levels. Due to the hybrid thermal systems formed by the modular power plants the well power output can be improved significantly, and the low pressure wasted wells or idling wells can be eliminated or avoided. The steam injectors and vacuum pumps required by traditional centralized power plants are not required anymore, so that the steam used for the steam injectors can be used to generate more power, and the elimination of the vacuum pumps results in less parasitic power consumption and higher operation reliability. The modular geothermal power plants can be installed on or near well pads, so that the steam collection losses, such as the steam pipeline pressure loss, the brine line thermal loss and the well head pressure flash loss etc., can be minimized, so that the well power output can be maximized. In addition, the geothermal modular power plants also make it possible to develop a geothermal field in multi and smaller phases and can bring each phase to COD in a much short term and more economically, thus the initial investment cost can be reduced significantly and the payback term will be much shorter.
Yan Tang
Kaishan Group, Shanghai, China
China
网页链接
Tang在全球地热大会的主旨演讲,与去年在印尼地热大会的主旨演讲的题目很像,印尼地热大会的演讲题目是Improving Well Thermal Efficiency Using Modular Geothermal Power Plants
。演讲的时间和地点分别是9月16日10:30 - 12:15,网页链接{Room 302 AB}。除了Tang的演讲以外,SMGP似乎还有几篇报告,大家可以在wgc2023的网站上搜索KS ORKA和Sorik Marapi,从而找到相关的资料。

全部讨论

2023-08-31 11:44

利用模块化地热发电厂提高出力效率
由于许多不确定性和资源开发成本高昂,地热能是一种昂贵的热能。地热井的出力越高,地热资源开发成本相对越低。应该最大限度地提高地热井的出力,并避免或消除低压废弃井或闲置井。
开山集团开发了以下四种类型的模块化地热发电厂:螺旋蒸汽膨胀机模块化发电厂、有机朗肯循环(ORC)蒸汽模块化发电厂、卤水ORC模块化发电厂和蒸汽与卤水双资源模块化发电厂,所有这些发电厂都已安装并在北美、欧洲、亚洲和非洲运行。
模块化发电厂具有最大的灵活性,可以用来组成各种混合热循环,从而最大限度地提高井的出力,并利用不同焓水平的地热井。由于由模块化发电厂形成的混合热系统,井的出力可以得到显著提高,低压废弃井或闲置井可以消除或避免。
传统集中式发电厂所需的蒸汽喷射器和真空泵不再需要,因此用于蒸汽喷射器的蒸汽可以用来产生更多的电力,而消除真空泵会导致更少的寄生功耗和更高的运行可靠性。
模块化地热发电厂可以安装在或靠近井块上,这样可以将蒸汽收集损失(如蒸汽管道压力损失、卤水管道热损失和井口压力闪蒸损失等)降到最低,从而最大限度地提高井的出力。
此外,地热模块化发电厂还可以实现多个较小阶段的地热田开发,并在更短的时间内以更经济的方式将每个阶段带入商业运营,从而可以大幅降低初始投资成本,回收期将更短。
汤炎 开山集团,中国上海

2023-08-31 20:52

KS参加地热大会了

2023-08-31 16:11

谢谢分享

2023-08-31 12:44